10kV Epoxy-Resin Cast Dry-Type Power Transformer
For building and industrial electrical systems.
- Voltage Class
- 10 kV
- Rated Capacity
- 30–2,500 kVA
- Secondary Voltage
- 0.4 kV
On this page
02 / Key specifications
Check the published ratings
Published product data. Unconfirmed items are omitted.
| Parameter | Published value |
|---|---|
| Electrical ratings | |
| Rated Capacity | 30 kVA - 2,500 kVA |
| Secondary Voltage | 0.4 kV |
| Frequency | 50/60 Hz |
| Phase | Three Phase |
| Vector Group | Dyn11 / Yyn0 |
| Performance | |
| Impedance | 4% - 6% |
| Construction | |
| Tap Positions | 5 positions |
03 / Applications & selection
Does it fit your project?
- Applications. Building and industrial electrical systems; factory and mining applications are listed in the reviewed source.
- Selection. Confirm primary voltage, ventilation, installation environment, enclosure rating, insulation class and the loss-test basis. These requirements are not published options or guaranteed values.
- Environment. Confirm installation conditions; no enclosure or indoor/outdoor rating is assumed.
04 / Construction & options
Confirm the construction
The brochure describes epoxy-resin cast windings and a cold-rolled grain-oriented silicon-steel core. Enclosure requirements must be specified for the installation; no enclosure protection rating is confirmed for this record.
Options: confirm the required configuration and interfaces before quotation.
Technical Details
This series uses epoxy-resin cast windings and a silicon-steel core. The source contains multiple temperature and insulation-class columns; loss values remain unconfirmed.
The primary-voltage range ends in 35kVA in the source. Cooling designation, insulation class, enclosure rating and project-specific loss values require confirmation. The loss table contains multiple temperature and insulation-class columns and apparent transcription anomalies. No project-specific certification, delivered-project reference or public datasheet is claimed. The brochure is a technical source and is not offered for public download.
05 / Standards, testing & documents
Agree the acceptance basis
- Standards: ANSI/IEEE, GB 20052-2020, IEC, NEMA. Confirm edition and applicability; not a certification claim.
- Testing / FAT: request confirmation of routine, type, special tests and witness arrangements.
- Acceptance: agree required records before ordering; availability remains pending.
Technical document status
Project-specific documents and release permission are confirmed against project requirements.
06 / FAQ
Resolve your procurement questions
Does the voltage class confirm the primary voltage?
10 kV is the classification of this series. The published secondary voltage is 0.4 kV. Primary voltage requires source clarification and project confirmation.
What distinguishes this product construction?
The brochure describes epoxy-resin cast windings and a cold-rolled grain-oriented silicon-steel core. Enclosure requirements must be specified for the installation; no enclosure protection rating is confirmed for this record.
Are drawings, test records and a datasheet available?
No public product datasheet or project-specific test record is established for this record. Document availability, release permission and any FAT or witness-inspection arrangement require supplier and project confirmation.
What should I include in a quotation request?
Please provide the cast-resin dry-type transformer capacity, confirmed primary voltage, required secondary voltage, frequency, vector group and impedance. Include enclosure, ventilation, installation environment, insulation-class and loss-test requirements, plus quantity and destination.
07 / Project RFQ
Request project pricing
10kV Epoxy-Resin Cast Dry-Type Power Transformer
Please provide the cast-resin dry-type transformer capacity, confirmed primary voltage, required secondary voltage, frequency, vector group and impedance. Include enclosure, ventilation, installation environment, insulation-class and loss-test requirements, plus quantity and destination.